How much are SMUD HVAC rebates in 2026?
SMUD's 2026 HVAC rebates top out at $3,000 per system, and the amount depends on what you take out and what you put in. The figures here come from SMUD's measure sheet dated February 1, 2026, a document we have now read more often than our own website. (Our website is shorter. It is also less exciting, which tells you something about our evenings.)
The three tiers are alternatives. One system qualifies for one category, and the three are not added together. That ends our dream of a $6,000 heat pump, but it does make the math simple.
The biggest amounts go to homes switching from gas to electric. If you already have a heat pump, the upgrade rebate is smaller, because the gas furnace SMUD most wants to see retired is already gone.
- $3,000, variable-capacity conversion: replace a gas furnace and AC with a qualifying variable-capacity electric heat pump
- $2,000, two-stage conversion: replace a gas furnace and AC with a qualifying two-stage electric heat pump
- $1,000, heat pump replacement: replace an existing electric heat pump with a qualifying higher-efficiency two-stage or variable-capacity system
Who is eligible for a SMUD heat pump rebate?
Eligibility starts at the electric meter. You need an active SMUD account, and the home has to be individually metered by SMUD. Single-family homes qualify, and so do multifamily buildings of up to four units, as long as each unit has its own SMUD meter.
Permits and inspections are required. They are the step people are most tempted to skip, and skipping them sinks the rebate. Budget the patience the way you budget the money (we know, patience is harder to finance).
Roseville is the big exception in our area. Roseville homes get their electricity from Roseville Electric, the city-owned utility, so SMUD rebates do not apply there. Roseville Electric runs its own programs, and its website has the current ones. If you are not sure who your utility is, the logo on your electric bill will tell you, and it is the one piece of mail nobody manages to lose.
- Active SMUD electric account
- Home individually metered by SMUD
- Single-family home, or multifamily up to 4 units with each unit individually metered
- Permits and inspections completed
- Installation and application handled by a participating SMUD Contractor Network contractor
What equipment qualifies for SMUD HVAC rebates?
SMUD's equipment rules cover the whole installation: the heat pump, the thermostat and the ducts it connects to. The list below is from SMUD's 2026 requirements as published on the measure sheet.
The duct leakage rule catches people off guard. A brand-new heat pump connected to leaky old ducts can fail the test, which turns duct sealing or replacement into part of the job. We have learned to read "duct leakage" as "someone needs to go into the attic," and that someone is usually us, in August, which feels personal.
The mini-split rule surprises people too. A single ductless unit in one bedroom does not qualify. A mini-split system has to serve the entire home.
- AHRI-certified two-stage or variable-capacity equipment
- 15.2 SEER2 minimum
- Wi-Fi-enabled programmable thermostat
- Duct leakage of 10% or less for existing ducts, 5% or less for new ducts
- New ducts insulated to R-8
- Title 24/HERS verification where it applies
- Mini-splits must serve the entire home
Does the installer have to be a SMUD participating contractor?
Yes. Installation and rebate submission must be handled by a qualifying participating SMUD Contractor Network contractor. That contractor prepares the application for your signature and submits it, so you are not filling in forms at the kitchen table at midnight. (A hobby we have tried. We do not recommend it.)
Before you sign anything, ask the contractor whether they are currently in SMUD's Contractor Network, then confirm it on SMUD's own list. That goes for us as well: ask us, then check with SMUD.
SMUD approval and funding also apply. SMUD approves the rebate, and the installer can't promise it on SMUD's behalf. Program funding can change during the year, so check the status before you plan around the money.
Can I combine SMUD rebates with other discounts or incentives?
SMUD rebates are separate from Capital City Comfort coupons, so don't assume they combine. Ask before you approve the work, and get the answer written into the proposal.
SMUD also lists related measures through its HPP track: $2,000 for air sealing plus insulation, $500 for new ducts and $500 for deep-buried ducts, with lower amounts of $1,000, $250 and $250 for duplexes, triplexes and fourplexes. Those require R-38 attic insulation and duct leakage to outside of 5% or less. Go Electric circuit and panel incentives may also apply.
If that paragraph felt like alphabet soup, you are reading it correctly. We lost count of the acronyms somewhere around HERS, and we do this for a living.
How do I apply for a SMUD HVAC rebate?
Start with a home visit and a written proposal that names the exact equipment, its AHRI certification, the SEER2 rating, the thermostat and any duct work. Compare that against SMUD's current requirements before you approve anything.
Have a recent summer electric bill and a winter gas bill handy. They help size the system and show what you spend on gas today, which is the number a gas-to-electric conversion is trying to replace.
After that, the participating contractor installs the system, the permit is closed out, HERS verification happens where required, and the contractor submits the application for your signature. The figures in this post match SMUD's official HVAC information as checked on October 10, 2026. Rules change, so confirm the current version with SMUD before you buy.
We will be rereading the measure sheet again next year, apparently for fun. In the meantime, if you want a furnace replacement and a gas-to-electric conversion priced side by side, call Capital City Comfort at (916) 390-0025.
Related services


