Skip to content
Capital City Comfort, Inc.

Capital City Comfort provides furnace repair in Sacramento for gas furnaces, heat pumps, ductless and packaged heating systems of all makes. We test controls, ignition, airflow and electrical parts to find the fault, then give a flat-rate price before repairs begin. If you smell gas, leave the building and call 911 first.

Flat-rate · No hourly fee · Open 24/7 · License #1071686

Replacement furnace with foil-wrapped ducts installed beside a water heater in a Sacramento-area garage

Homeowners, renters with a landlord's go-ahead, and businesses whose heat has stopped working or is working badly. Sacramento winters are mild by most standards, which is little comfort at 6 a.m. when the house reads 54 degrees.

We service all major heating equipment makes and models, including furnaces in garages, closets and attics. You don't need to know the model number to call.

No heat or the furnace won't start

The thermostat calls for heat and nothing happens. Controls, ignition parts and power supply are the first things we check.

Cool air during a heating call

The blower runs but the air is lukewarm or cold. This can come from ignition or flame-sensing problems, or a heat pump control issue.

Frequent starts and stops

Short cycling wears parts and leaves rooms uneven. Airflow restrictions and control faults are common causes.

Weak airflow or uneven rooms

Some rooms stay cold while others are warm. Blower motors, filters and duct problems can all play a part.

Unusual noises or changing operation

Banging, squealing or a furnace that sounds different from last winter deserves a look before it stops altogether.

Control alerts or water near the equipment

A flashing code or water around a high-efficiency furnace usually points to a drainage or sensor problem.

What's included

  • Thermostat communication and startup sequence checks
  • Ignition and flame-proving checks on gas furnaces
  • Airflow, blower and electrical testing
  • Operating controls and drainage checks
  • A flat-rate repair price before any work, and a test heating cycle afterward

How the price works

We diagnose the furnace first, then give you a flat-rate repair price before any work starts, with no hourly fee. The price depends on the failed part, whether it's stocked or has to be ordered for your model, and how hard the furnace is to reach in an attic, closet or crawl space. Some repairs depend on equipment-specific parts, and we'll tell you if that affects timing.

Get a price: (916) 390-0025

  1. Step 1

    Safety first, then call

    If you smell gas or a carbon monoxide alarm sounds, leave and call 911 from a safe place. For everything else, call us 24/7 at (916) 390-0025.

  2. Step 2

    Diagnosis at the furnace

    We check thermostat communication, the startup sequence, ignition, airflow, electrical connections and drainage.

  3. Step 3

    Flat-rate price and options

    You hear what failed and what it costs to fix. If replacement is worth considering, we'll say so and explain why.

  4. Step 4

    Repair and a full heating cycle

    After the repair we run the furnace through a complete heating cycle to confirm it lights, heats and shuts down properly.

Rated 4.9 from 222 Google reviews

“The AC and heat works phenomenal. Thank you so much and we recommend Capital City Comfort to any and everyone.”
Guru 64 · Google
“Great service! Deione took care of my HVAC when no one else was available!”
Michael Katreeb · Google
“The part showed up overnight and installed the next day.”
Bill Bulock · Google

The longer answer

Gas smells and carbon monoxide alarms come first

If you smell gas or suspect a gas emergency, leave the area and call 911 from a safe location. Don't flip switches, light anything or try to find the leak yourself.

A carbon monoxide alarm needs the same emergency response. Get everyone outside, call 911 and let the fire department or gas utility clear the building before anyone goes back in.

Once the emergency services have made the home safe, call us to find and repair the cause. Working CO alarms near sleeping areas are worth checking every heating season.

Fixing the furnace you have or replacing it

A furnace that fails once after years of reliable service is usually a repair. One that has needed several repairs, heats unevenly or uses an older, less efficient design may be due for replacement.

When replacement comes up, we'll often price a heat pump alongside a new furnace. If your AC is aging too, one electric heat pump may be able to handle both jobs, and SMUD customers may qualify for rebates.

We've replaced furnaces in garages, closets and attics, including moving a closet furnace into a horizontal attic unit. Location matters for both cost and future service access.

Furnace & Heating Repair near you

We cover Sacramento and 45 nearby communities. These pages explain what's different about homes and weather in each area.

Furnace & Heating Repair: common questions

What should I do if I smell gas near my furnace?

Leave the building right away and call 911 from a safe location. Do not use light switches, phones or anything that could spark inside. Once emergency services say it's safe, we can diagnose and repair the furnace.

Why is my furnace blowing cold air?

Cold air during a heating call can come from an ignition problem, a flame sensor fault, an overheating safety shutoff or a thermostat setting. On a heat pump it may be a control or defrost issue. A technician needs to test the system to confirm which one it is.

Do you repair heat pumps as well as gas furnaces?

Yes. We repair gas furnaces, heat pumps, ductless systems and packaged heating equipment. We service all major makes and models.

Can you come out at night for a furnace that won't start?

Our phone is answered 24/7, so you can call at night or on weekends. Being open around the clock doesn't guarantee a specific arrival time, and we'll tell you when we can get there.

Need furnace & heating repair today?

Call any hour. We explain what we find and give you a flat-rate price before any work starts.

We pick up 24 hours a day, explain what we find and give you a flat-rate price before any work starts. No hourly fee.

CA contractor license #1071686 · Since 2016

Call 24/7Book service