A gas to electric conversion in Sacramento replaces a gas furnace and central AC with one electric heat pump. Capital City Comfort compares the conversion with a furnace replacement, checks airflow, ducts and electrical capacity, and gives a flat-rate price. SMUD lists rebates up to $3,000 for qualifying conversions; ask us about eligibility.
Flat-rate · No hourly fee · Open 24/7 · License #1071686

Homeowners whose gas furnace and air conditioner are both getting old, people planning an all-electric home, and SMUD customers curious about the conversion rebates.
It also suits anyone who wants an honest comparison before committing. Some homes are excellent candidates. Others need electrical or duct work first, and we'll tell you which yours is.
Both systems are aging at once
When the furnace and AC are both close to replacement, one heat pump can replace two pieces of equipment.
You're on SMUD
SMUD offers rebate tiers for qualifying gas-to-electric conversions, subject to eligibility and funding.
You want to retire the gas line to the furnace
A conversion removes gas from the heating system. Water heaters and stoves are separate decisions.
Your AC died before the furnace did
Rather than buying a new AC and keeping an old furnace, it may be worth pricing a heat pump that does both.
What's included
- Side-by-side comparison with a furnace replacement
- Airflow, return duct and electrical capacity review
- Equipment access, thermostat and old system removal in the estimate
- Heat pump installation with American Standard equipment
- Guidance on SMUD rebate requirements and what they mean for equipment choice
How the price works
We give one flat-rate price for the conversion after reviewing the house, with no hourly fee. Cost depends on equipment capacity and type, whether the electrical panel or circuits need upgrading, return duct and airflow changes, and equipment access. SMUD lists rebates for qualifying conversions of $3,000 for variable-capacity or $2,000 for two-stage equipment; these are alternative categories, not added together.
Get a price: (916) 390-0025Step 1
Gather two bills and call
Have a recent summer electric bill and winter gas bill handy, then call (916) 390-0025.
Step 2
Home review
We look at airflow, return ducts, electrical capacity, equipment access and the thermostat.
Step 3
Conversion vs. furnace pricing
You get flat-rate prices for both paths, plus what each would mean for rebate eligibility.
Step 4
Installation and removal
We install the heat pump, remove the old furnace and AC, and test heating and cooling before handing over.
Rated 4.9 from 222 Google reviews
“Deione Brown, we truly appreciate your hard work, dedication, honesty and integrity. He never upsell any product to us.”
“Excellent experience! Honest, fair pricing, and they don't try to 'upsell' you on products/services that you likely do not need. Highly recommend!”
“His price was great and service was even better.”
The longer answer
How the SMUD conversion rebates work
SMUD lists three alternative HVAC rebate categories: $3,000 for replacing a gas furnace and AC with a qualifying variable-capacity electric heat pump, $2,000 for a qualifying two-stage heat pump, and $1,000 for replacing an existing electric heat pump with a higher-efficiency system. One system gets one category, not all three.
Equipment rules include AHRI-certified two-stage or variable-capacity equipment, a 15.2 SEER2 minimum, a Wi-Fi-enabled programmable thermostat and applicable Title 24/HERS verification. Existing ducts must test at 10% leakage or less, new ducts at 5% or less. You need an active SMUD account and an individually metered home, and permits and inspections are required.
Installation and rebate submission must be handled by a participating SMUD Contractor Network contractor, and SMUD approval and funding apply. Ask us about eligibility for your home before you plan around a rebate. Figures are from SMUD's measure sheet dated February 1, 2026.
What a conversion estimate needs to cover
A heat pump often moves air differently from the furnace it replaces, so airflow and return ducts need checking. Undersized returns are a common reason a conversion feels weaker than expected.
Electrical capacity is the other big question. Some homes have room in the panel; others need a circuit or panel upgrade. The estimate should also cover equipment access, the thermostat and removal of the old system.
A room addition with no ductwork may call for a different approach, such as a ductless head for that space. We'll include that in the comparison if it applies.
Gas-to-Electric Conversion near you
We cover Sacramento and 45 nearby communities. These pages explain what's different about homes and weather in each area.
Gas-to-Electric Conversion: common questions
How much is the SMUD rebate for a gas to electric conversion?
SMUD lists $3,000 for a qualifying variable-capacity conversion and $2,000 for a qualifying two-stage conversion. These are alternatives, not stacked amounts. Eligibility, a participating SMUD Contractor Network contractor, SMUD approval and funding all apply.
Will I need a new electrical panel for a heat pump?
Not always. It depends on your panel's capacity and what else it already serves. We check electrical capacity during the home review and include any needed upgrade in the price.
Can I convert just my heating and keep my gas water heater?
Yes. An HVAC conversion replaces the gas furnace and central AC with a heat pump. Your water heater, stove and dryer are separate decisions.
Is a heat pump cheaper to run than a gas furnace?
It depends on your electric and gas rates, insulation and equipment efficiency. That's why we ask for a recent summer electric bill and winter gas bill before comparing the two options for your home.
Related services
Heat Pumps
One system for summer cooling and winter heating. We install heat pumps sized for Sacramento's climate and repair and maintain the ones already working hard.
Furnace & Heating Repair
Furnace won't kick on, blows cold air or keeps starting and stopping? We repair gas furnaces, heat pumps and packaged heating of all makes, with the price agreed before work starts.
Ductwork & Duct Design
We design custom ductwork in house to fit the equipment and the building, from exposed spiral duct to sheet-metal runs along an outside wall. Duct repair and cleaning too, with straight advice on which one you need.
Need gas-to-electric conversion today?
Call any hour. We explain what we find and give you a flat-rate price before any work starts.

