Skip to content
Capital City Comfort, Inc.

Capital City Comfort installs ductless mini split systems in Sacramento for additions, garages, converted spaces, offices and rooms that never get comfortable. Heat-pump mini-splits both heat and cool without ductwork. We design single-zone or multi-zone layouts around each room, then give a flat-rate price listing every part of the job.

Flat-rate · No hourly fee · Open 24/7 · License #1071686

Ductless mini-split outdoor unit on a block wall with refrigerant lines routed up to the roofline during installation

Homeowners with a room addition, a garage conversion, an upstairs bonus room that bakes in July, or an older house with no ducts at all. Businesses use them for offices and back rooms the main system doesn't serve well.

If the rest of the house is comfortable and only one or two spaces aren't, a mini-split is often simpler than extending ductwork.

A room addition with no ducts

New space without duct access is the most common reason to choose ductless.

The garage or workshop is unusable in summer

A single-zone unit can heat and cool a converted garage without touching the main system.

One room is always too hot or too cold

Sun-facing rooms and spaces at the end of long duct runs often lose out. A dedicated zone fixes that room directly.

An older home without ductwork

Running ducts through finished walls can be costly. Multi-zone ductless avoids most of that work.

Your existing mini-split needs repair

We repair ductless systems from all major makes, including ones another company put in.

What's included

  • Room-by-room design: size, insulation, sun exposure and placement
  • Indoor and outdoor units with line-set routing and protection
  • Wall penetrations, electrical work and condensate drainage as listed in the proposal
  • Controls setup, including thermostat interface where needed
  • Start-up testing in heating and cooling modes

How the price works

Every ductless job gets a flat-rate price before work starts, with no hourly fee. The price changes with the number of zones, line-set length and routing, wall penetrations, electrical work, and whether a condensate pump is needed. Your proposal states which of those are included so nothing surprises you later.

Get a price: (916) 390-0025

  1. Step 1

    Tell us which rooms

    Call (916) 390-0025 and describe the spaces you want to heat or cool and what's wrong with them now.

  2. Step 2

    Layout visit

    We look at room size, insulation, sun exposure, where units can go, drainage, electrical capacity and how the lines will run.

  3. Step 3

    Proposal and flat-rate price

    You get a layout, the equipment and a price that states whether wall penetrations, line protection, electrical and a condensate pump are included.

  4. Step 4

    Install and test

    We mount the units, route and protect the lines, connect power and drainage, and test every zone.

Rated 4.9 from 222 Google reviews

“Outstanding customer service and exceptional workmanship from start to finish!”
Chance Denton · Google
“Very respectful and knowledgeable”
Tia Wilridge · Google
“Deione was able to quickly fix the issue and at a very reasonable price so we are extremely happy with the service!”
K Cooper · Google

The longer answer

How many indoor units you actually need

More indoor units are not automatically better. Each zone should be justified by the layout and how you use the space. A large open living area might need one head, while two small bedrooms down a hall may each need their own.

Placement matters as much as count. We consider room size, insulation, sun exposure, where the unit will blow, condensate drainage, appearance and service access.

Single-zone systems pair one indoor unit with one outdoor unit. Multi-zone systems run several indoor units from one outdoor unit, which saves wall space outside but ties the zones to the same equipment.

Line sets, drainage and how it looks from outside

The refrigerant lines between indoor and outdoor units have to go somewhere. We plan the route for the shortest clean run, then protect the lines with a cover so they hold up to sun and weather.

Every indoor unit makes condensate in cooling mode. Where gravity drainage won't work, a condensate pump is needed, and your proposal should say so.

If you'd like a smart thermostat to run a ductless system, it may need a manufacturer interface or adapter. We'll confirm compatibility first.

Ductless Mini-Splits near you

We cover Sacramento and 45 nearby communities. These pages explain what's different about homes and weather in each area.

Ductless Mini-Splits: common questions

Can a ductless mini split heat as well as cool?

Yes. Heat-pump mini-splits provide both heating and cooling from the same indoor and outdoor units. They work well in Sacramento's mild winters.

Can one outdoor unit run several rooms?

Yes, a multi-zone system connects several indoor units to one outdoor unit. Whether that suits your home depends on the room layout, the distance between rooms and how you use each space.

Do I need a condensate pump for a mini-split?

Only when the condensate can't drain by gravity from where the indoor unit is mounted. We check this during the layout visit and list it in your proposal if needed.

Will a mini-split qualify for a SMUD rebate?

SMUD's rules say qualifying mini-splits must serve the entire home, so a single-room unit usually won't qualify. Other equipment and installer requirements also apply, so ask us about eligibility before planning around a rebate.

Need ductless mini-splits today?

Call any hour. We explain what we find and give you a flat-rate price before any work starts.

We pick up 24 hours a day, explain what we find and give you a flat-rate price before any work starts. No hourly fee.

CA contractor license #1071686 · Since 2016

Call 24/7Book service